Stepon Powermac is a Largest Manufacturers of Servo Voltage Stabilizer

The Servo Voltage Stabilizer uses a sophisticated electronic servo-motor idea to manage a motorized variable electrical device. These machines aren't affected unduly by power issue or frequency variation. This sort of technology tends to be extraordinarily effective once considering giant 3 section applications, because it is ready to keep up its accuracy of all 3 phases, each line to line and line to neutral, regardless of input voltage balance and cargo balance at any power issue. They're additionally ready to stand up to giant in pour currents, usually practiced with inductive hundreds. But attributable to the mechanics of this sort of stabilizer, periodic maintenance is needed.

Servo Voltage Stabilizer

Technical Specification

• Input Voltage 340-480V, 300-500V, 360-460V Or 380-480V Line to Line, 3 Phase 4 Wire or as per specified by customer.
• Output Voltage 415±1% line to line nominal or as specified by customer.
• Rate Of correction:- 16-100V/sec line to line
• Response Time:- 10 m sec
• Efficiency:- 98% at full Load.
• Protections: - over Voltage & under voltage Cut-off, over load, Short circuit and single Phasing Preventer.
• Output Voltage Adjustment +/- 10 V.
• Frequency 47-63 HZ & operating temperature 15’C to 50’C
• Wave from distortion – Nil
• Class C Surge Suppressor.
• Servo Motor drive- AC Synchronous Motor.
• Effect of Load Power Factor- Nil
• Insulation Class-B.
• Offered unit has LCD display showing input/output voltages and load current along with Fault/trip messages.

 Subscribe in a reader